Durasi : 08.30 - 16.30 WIB
WHO SHOULD ATTEND
PARTICIPANT
Team leader, supervisor, manager and anyone who want to improve their skills
TRAINING METHOD
Presentation / Discussion / Case Study / Evaluation
OBJECTIVE
After following the course, participants will understand about:
- Shrinkage and loss measurements using MIGAS and ASTM standard
- Hydrocarbon management and control
- Understanding Additives, Base Oils and Grease Thickeners
- Proper Storage, Handling, and Managing Lubricants and Oil
OUTLINE
1. Refinery Material Balance
- Introduction
- Basis of the balance
- Definitions
- Material balance example
- Process operating losses
- Accounted loss table F
- Loss monitoring
- Loss reduction
2. Measurement
- Introduction
- Stock measurement
- Imports
- Products
- Mass and weight
3. Measurement and Evaluation Of Fuel
- Introduction
- The refinery fuel system
- Fuel measuring systems
- Mass and energy balance checks
- Maintenance of fuel systems
- Quality properties fuel
4. Tankage and Storage
- Introduction
- Physical loss
- Measurement
5. Loss From Process Units
- General
- Losses to flare
- Losses from aqueous streams
- Hydrocarbon leaks to atmosphere
- Losses during shutdown and startup
- Losses during process upsets
- Processing losses
6. Hydrocarbon Management and Control
- Introduction
- Component uncertainties
- Overall loss uncertainty
- Examples
- Hydrocarbon contamination control (keep clean, proper storage and handling)
7. Lubrication Fundamentals
- Important functions of lubricating oils
- Quality properties of lubricant
- How oils and greases are formulated and why it is important
- How friction is generated in lubricated machinery
- The importance of oil film thickness and critical clearances
8. Understanding Additives, Base Oils and Grease Thickeners
- How lubricant properties irreparably change
- important physical properties of a base oil
- How to use temperature to determine the right base oil for your machine
- How to select grease thickeners for your application
9. Lubricant Contamination Control
- Building reliability through contamination control
- most destructive contaminants and how to control themproactive maintenance
- Understanding the Contaminant Code
10. Oil Drains, Flushing, and Reservoir Management
- How to optimize and extend oil change intervals
- Interval vs. condition-based oil change
- How to monitor lubricant consumption
- Best practices for oil changes
- How and when to perform a flush
- Selecting appropriate cleaning and flushing procedures
- Losses of lubricant properties
11. Proper Storage, Handling, and Managing Lubricants
- How to set up a world-class lube room
- How to optimize lubricant selection/procurement
- How to implement a lubricant consolidation program and select suppliers
- Best practices for inspecting/testing new lubricants
- Used lubricant storage, handling, and disposal best practices
- Temperature
- cleanliness oils
12. Used Oil Analysis Fundamentals
- What oil analysis can tell you
- Types and categories of oil analysis
- Applications for oil analysis
- Overview of oil analysis tests
13. Oil Sampling
- Elements of a successful oil analysis program
- How to find the best sampling locations
- The importance of primary and secondary sampling points
14. Peraturan MIGAS dan ASTM Standard untuk Pengukuran Penyusutan Minyak.
Trainer : Spectracentre Trainer Team